Product Brief - Model C1172 OMNI8/16C INPUT BD 19-60Vdc

OMNI8/16C 8 CHANNEL ISO TERMINAL19-60Vdc INPUTS

 8 Inputs individually isolated to 500Vrms
 Field to Logic Isolation of 1500Vrms
 Wide 19-60Vdc Input operating range
 Plug-in Terminals for easy maintenance


Omni8/16C 8 Channel Isolated Input Board. Inputs from 19 to 60V dc only. This is a spare part. Order with annunciator, add option -2 if fitted to new Omni8/16C unit.


This Omni16C input board is designed for use in applications where the input source voltage is supplied external to the Omni16C. This module provides 1500Vac input to logic isolation and 500Vac inter channel isolation.

This input module should be used in applications where the Omni16C inputs need to be connected directly to electrical circuits such as powered contacts, relays, relay logic or interlocks etc.  This allows the annunciator to be integrated into applications without the use of interposing relays.

The input sense selection (state of the input on/off for an alarm condition) is set via “DIP” switch and inputs are connected via plug-in terminals that allow easy disconnection of the module without disturbing the wiring.

Individually isolated inputs allow each input to be used in a different electrical circuit such as found in motor control circuits.

These boards should only be fitted by Omniflex trained service personnel.

To order this input board separately as a spare part, use Order Code C1172.

To order this input board as a factory-fitted option to a new Omni16C, add -2 to the Order Code.

Example:

To order a new Omni16C fitted with these inputs, order as follows:
Item 1. C1480 Annunciator :   Qty 1   Order code: C1480-2

The -2 option instructs the factory to fit these terminal boards to the annunciator.

Further Literature 
Datasheet
Full specification and order information
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy