Product Brief - Model C1479B Omni16C RLU (24V Comm) Ribbon Cable

Omni16C RLU (24V Comm) Ribbon Cable

picarrow Provides reliable alarm functions for critical alarms
arrow Small , compact, surface mounted and easy to use
arrow 16 Potential Free Contact Inputs
arrow 27 Standard Alarm Sequences
arrow 24Vdc, 48Vdc or 85-264Vac/dc Powered
arrow Normally Open/Closed Selectable via DIP switch
arrow Four versatile Group Alarm output contacts
arrow Optional High Power Lamp Driver outputs
arrow Optional Serial Port - Modbus/PLC compatible
arrow Fully "DIP" Switch Configurable
arrow Certified to IEC61508 SIL1 Safety Standard
arrow UK Nuclear Industry SIL1 EMPHASIS Assessed


Remote Logic Unit, 16 Potential Free Contact (+ve common) Input annunciator no display. Display connected via ribbon cable ordered separately.


Overview
The Omni16C RLU is a full function alarm annunciator logic module for 16 alarm points. Interconnect up to 16 modules together to produce an alarm annunciator up to 256 points. Connect to remote alarm displays such as the Omniflex Model C1670 or C1486 series for a complete window alarm annunciator system, or wire to individual mimic lights to provide full critical alarm functionality to your mimic display.

Inputs
The 16 inputs accept potential free inputs and are individually "DIP" switch configured for N.O. or N.C. operation.

Alarm Sequences
The alarm sequence for the 16 inputs can be configured by DIP switch with a choice of 27 standard sequences. More individualised or advanced settings are done through the programming port accessible on the unit using the free Omniset Configuration Utility.

Control Pushbuttons
Test, Silence, Acknowledge and Reset Pushbutton input terminals are provided for a wide variety of control options.

Group Alarm Functions
The four common output relays can be configured as group alarm, horn output and watchdog. Functions such as Relay follows input or alarm, Multiple Re-flash, or Ring-back horn are easily settable on these relays.

An Inhibit input function is provided which disables all the inputs on the annunciator, for example during plant startup or shutdown periods.

Optional Communications Serial Port
An optional RS232/485 serial port can be fitted to allow all alarm functions to be accessed from your PLC or SCADA using the popular Modbus protocol.

Optional Housing Size
This product can be ordered in two housing sizes. The full size housing has space for the optional ac/dc internal power supply, and the optional repeat output and lamp driver modules. The compact housing suits small spaces where these options are not required, and back-of-panel space is limited.

Optional High Power Lamp Driver Outputs
A version of this product is available equipped with high power lamp drivers. These drivers can source 24Vdc up to 250 mA, with short circuit protection, to drive higher power mimic lights, or large alarm displays.

Further Literature 
Datasheet
Full specifications and Order Information
User Manual
User Manual in PDF
SIL1 Information
Omni8/16C Certified SIL1 Alarm Annunciators
Declaration of Conformity
Compliance Specifications
RoHS Compliance Certificate
RoHS Compliance Certificate with a list of RoHS Compliant Products
Related Products
 Omni8/16C Std Input Bd +Comm
Omni8/16C Standard 8 Channel Isol. Input Board +ve Comm
 Omni8/16C Std Input Bd -ve Comm
Omni8/16C Standard 8 Channel Isol. Input Board -ve Comm
 Omni8/16C Input Bd 19-60Vdc
Omni8/16C Std 8 Channel Isol. Terminal 19-60Vdc Input Board
 Omni8/16C Input Bd 90-150Vac/dc
Omni8/16C Std 8 Channel Isol. Terminal 90-150Vac/dc InputBd
 Omni8/16C Lamp Driver 16ch
Used to provide extra lamp drive capability for Omni8s and Omni16Cs
 Omni8/16C 16 Way Repeat Ribbon Header Bd
Used to provide Omni8/16C Input repeat statuses to other devices
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy