Product Brief - Model C1495B SERIAL BACKLIT DISPLAY (Lamps fitted)

OMNI8C BACKLIT SERIAL DISPLAY WITHOUT CSC Bd (WITH LAMPS)

 Drive Window displays from your serial port
 Easy to configure Modbus protocol
 24Vdc Powered
 Small , compact, panel mounted and easy to use
 Built in Alarm Flashing sequences to reduce PLC programming overhead
 Backlit Display (with lamps)
 User printed legends on inkjet/laser
 Four Optional Group Alarm output contacts
 Optional Control Pushbuttons for operator feedback
 Fully "DIP" Switch Configurable


Omni8C - Serial Input 8 Point Backlit Incandescent Lamp Annunciator without Common Services Bd. Supplied with PC templates to print transparencies for alarm point legends. Driven by RS232/RS485 port with Modbus Protocol. Powered from 24Vdc.


The Omni16C Serial Display Product Range provides an easy-to-use alternative to providing Alarm Window facilities from your PLC, DCS or SCADA system. Each of these products has a fully isolated RS232/RS485 serial interface that provides full control of up to 16 alarm and status windows. Up to 32 of these displays may be multi-dropped on a single RS485 twisted pair, providing up to 512 Window Status and Alarm display points from a single serial port acting as a Modbus Master. Each Display serial port acts as a Modbus slave, and can be set to either ASCII or RTU mode at baud rates from 300 to 9600 baud.

Display options include incandescent lamps, backlit LED and Sidebar LED indicator windows to provide the user with the best combination of power consumption, reliability, maintenance and cost for the application. 27 integrated alarm flashing sequences included in the display remove the need for programming of alarm sequences in the PLC/DCS reducing engineering charges and program space, while increasing reliability.Optional integral Test, Silence, Acknowledge, Reset Pushbuttons allow Operator alarm acknowledgment without any additional programming. Four optional output relays can be configured as group alarm, horn output and watchdog outputs.

Further Literature 
Datasheet
Full specifications and Order Information
User Manual
User Manual in PDF
Relevant Downloads
 Window Legend Templates
Use these templates to easily create window legends on any inkjet or laser printer.
Related Products
 Accessories
Check the full list of accessories for Omni16 Range.
 Mini-Jack Programming Cable
Use this mini-jack programming cable to configure Omni16C and Omniterm products
 Other Omni16 Annunciators
See the full list of Omni16 Alarm Annunciators and Displays
 Omni16 Remote Pushbutton Station
Panel Mount. With Sil, Ack, Reset and Test Pushbuttons and built-in audible sounder.
 Omni8/16C Lamp Driver 16ch
Used to provide extra lamp drive capability for Omni8s and Omni16Cs
 Omni8/16C 8 Way Repeat Relay Board
Used to provide 8 relay N.O. contacts to terminals
 USB to Serial Converter
Used for laptops without serial ports; used in conjunction with Omniflex serial programming cables
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy