Product Brief - Model C2195A PTS Powerterm Solar Regulator

PTS 12V OR 24V 140W SOLAR REGULATOR/POWER SUPPLY

 Charging characterised for sealed lead-acid cells.
 Operates with up to 140W Solar Panels.
 Under-voltage cut-out protects battery from deep discharge.
 Series regulator design for best efficiency.
 Solar charging output for system monitoring.
 DIN Rail mounting.
 Temperature compensated battery charging for best standby time and battery
 12Vdc or 24Vdc operation


The Powerterm PTS is a combined Solar Regulator, Power Supply system with integrated standby battery management for small solar powered applications. DIN rail mounted accomodating solar panels up to 140W and characterised for sealed lead acid batteries.


Overview

The Powerterm PTS is a combined Solar Regulator and Power Supply system with integrated standby battery management for small solar powered applications.

Just connect a solar panel, sealed lead acid battery and load for an industrial grade solar powered system.

This DIN rail mounted product is ideal for providing dc power to Teleterm M2-series RTU systems when mains power is not available. Applications include RTUs, data-loggers, remote monitoring, and alarm systems.

Under-voltage Cut-Out

In the event of complete discharge of the battery, an under-voltage cut-out disconnects the load preventing the battery entering its "deep" discharge phase, which can cause irreparable damage to the battery, and reduce its capacity and life.

Fault Protection

Batteries are capable of delivering very large currents under system fault conditions that can damage wiring and equipment. The PTS incorporates an auto-resettable load cut-out, which disconnects the load under over-current fault condition.

Charge Control

The PTS controls the charging of the battery to ensure optimum life. When the battery is fully charged, the PTS will disconnect the solar panel to prevent overcharging.

System Monitoring

The PTS provides a Charge detect output. When the solar panel is connected and charging, this output is on. This output can be used to detect solar panel or charger failure, or to measure actual charging hours.

12/24V Selectable

The PTS can be used in 12V or 24V applications. The PTS can be switched to the correct battery voltage and adjusts the solar regulator and low voltage cut-out accordingly.

Temperature Compensation

In outdoor environments, the ideal battery voltage will vary with temperature. The PTS has a temperature sensor that compensates for changes in ambient temperature to keep the battery at its optimum.

Further Literature 
Datasheet
Full specifications and Order Information
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy