Products > Product Brief > C2361C-0-0
Product Brief - Model C2361C-0-0 Teleterm M2e
M2e 10/100 ETHERNET + SERIAL MODBUS
12 Configurable Inputs and Outputs 10/100 Ethernet port ISaGRAF 61131-3 Programmable micro-SD Card Logging Low power operation Two serial ports (incl. RS485)
Programmable 10/100 ETHERNET RTU with 12 Universal I/O DI/DO/AI/AO, RS232/485 Modbus Master or Slave or Conet/s or Custom Protocol. Powered from 9-30Vdc. Battery backed Real Time Clock
Note: This product has been superseded by the C2363A-0-0.
The TELETERM M2 is a state-of-the-art RTU designed to expand the possibilities of remote monitoring and control by providing a cost effective platform with a wide range of features.
The TELETERM M2 comes with 12 universal I/O that can be configured for anlogue or digital input or output according to your needs. The on board RS232/485 port can be used to acquire data from other third party devices using either the Modbus protocol, or by downloading a custom software protocol plug-in. This feature allows a wide variety of third party devices to be supported. The low power consumption of the Teleterm M2 makes it suitable for use in solar-powered and battery-powered applications.
Teleterm M2 can also be programmed in ISaGraf (selectable option), an industry standard programming environment for all five IEC61131-3 programming anguages, providing the ability to do local control, and custom logic. The Teleterm M2 also incorporates an micro SD memory card slot to support local data logging. The Teleterm M2e C2361C-0 is also equipped with 10/100 Ethernet port.
Typical applications for the M2 and M2e include:
- Energy Management and Remote Meter Reading.
- Environmental Monitoring
- Remote Site Monitoring
- Utilities monitoring
- Pump Stop and Start Control
- Reservoir Pump Integrated Control
- Message Board Ethernet Connection from Plant
|
|