Product Brief - Model C2462A OT LPD


 Isolate any instrument current loop to 1500Vac
 Powered by the current loop
 High load capability (1 kohm)
 Dual channel for high density applications
 Reverse polarity and overload protected
 Load independent - no field calibration required
 Certified to IEC61508 SIL1 Safety Standard
 Ultra-Low volt drop <3 Volts at 20 mA (2,5V Typical)

Omniterm LPD. Dual Loop powered (4-20mA) Isolator that provides 1500Vrms isolation on any current loop. Ultra Low Volt drop on input <3V. with independent channels in a single 22.5mm wide housing.

The OMNITERM LPD is a dual loop powered isolating current repeater specifically designed to isolate instrument current loops from circulating ground currents that can cause system inaccuracies, or at worst, instrument failure. Insert in any 4-20mA current loop to isolate the instruments in the loop. Each channel of the LPD is completely separate and isolated from the oher.

The current applied to the input of a channel is repeated on the isolated output, and the load present on the output is reflected back to the input. No separate power source is required.

Forming part of OMNIFLEX' extensive OMNITERM range of industrial instrumentation, the OMNITERM LPD is designed to be DIN rail mounted, and is 22.5mm wide.

For single channel applications consider the single version Omniterm LPI (model C2063B)

Further Literature 
Full specifications and Order Information
Omniterm B Shortform Brochure
Overview of the Omniterm B series Products
Installation Guide
Details of installation requirements and further specifications.
Related Products
 Omniterm LPI
Single Channel Loop Powered Isolator
 Other Loop Isolators
See other Current Loop Isolators in the Omniterm Range
Related Links
 Omniterm Range Overview
Find similar products from the full range of Omniterm Signal Conditioning modules
Ask for Support
Send a request to our Technical Support Staff


Request a Quote
Send a request for quote to our Sales Staff