Product Brief - Model C2465B Omniterm TTB

OMNITERM TTB (DUAL TRIP ALARM)

 Two Independant Trip Relay Outputs
 250Vac (30Vdc) 5 Amp contact rating
 0-20mA and 0-10V Inputs
 24Vdc Powered
 Montor Points for easy adjustment
 Din Rail Mounting
 Normally Energised/De-energised relays
 Change-over contacts on both relays
 Certified to IEC61508 SIL1 Safety Standard


Omniterm TTB Current or Voltage Input 2 form C (Changeover Contacts 5A) Relays. 24Vdc Powered


OVERVIEW

Use the Omniterm TTB Dual Trip Amplifier to monitor a 0-20(4-20mA) or 0-10V(1-5V) signal and output two high or low alarm/trips via Form C relay contacts.

All settings are user configurable allowing only one unit type to be kept on the shelf for all input ranges.

The fully isolated input and low insertion loss allows the Omniterm TTB to be inserted into any voltage/current instrumentation without affecting the integrity of the loop.

Monitor points on the front of the Omniterm TTB allow the setpoints to be set using a multimeter without interfering with the input signal.

HIGH RELIABILITY

This product has been designed with high reliability applications in mind. The input stage has a built in wire break detection circuit that will de-energise the trip relays if the input current falls below 2mA.  This product has been certified

PART OF THE FULL RANGE

The Omniterm TXB is part of the latest Omniterm range of signal conditioning modules.
See the full range here

Further Literature 
Datasheet
Full specifications and Order Information
Omniterm B Shortform Brochure
Overview of the Omniterm B series Products
Installation Guide
Details of installation requirements and further specifications.
SIL1 Information
SIL1 Reliability Data
Declaration of Conformity
Compliance Specifications
Related Links
 Omniterm Range Overview
Find similar products from the full range of Omniterm Signal Conditioning modules
 Other Trip Amplifiers
See other Trip Amplifiers in the Omniterm range.
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy