Product Brief - Model M1432C 8 TC/mV ISO


 8 Channels of Thermocouple/milliVolt Input
 High Inter-channel Isolation
 Individual Channel Input Calibration
 Four alarm setpoints for each channel

Maxiflex 8 channel ISO TC/mV input module. Supports Type E,J,K,T,N,B,R,S Thermocouples.Input range and TC type may be different for each channel. Each channel can have 4 Setpoints High, High High, Low, Low Low and deadband set in config download.

The M1432C 8TC module provides 8 thermocouple or millivolt inputs. The inputs are individually galvanically isolated. This intelligent module is software configurable, and allows each input to be configured for a different input type and range.

For temperature applications, the module will convert the thermocouple reading directly into degrees C or F to a resolution of 0.1 degrees. Thermocouple upscale/downscale burnout can be selected by configuration.

For millivolt inputs, the millivolt value can be read as either a scaled percentage value or the actual mV value as a signed integer to 2 decimal places. Ie 0.00% to 100.00% or -10.00 to +80.00mV. Over-range and under-range inputs are read as -32768 and 32767 respectively.

Each input has four software settable alarm/trip setpoints and a deadband value. The status of the alarm/trip signals is available as derived digital inputs from the module.

High inter-channel galvanic isolation allows inputs to be connected to high common mode voltage sources without detrimental effect.

Further Literature 
Full specifications and Order Information
Installation Guide
Details of installation requirements and further specifications.
Declaration of Conformity
Compliance Specifications
Ask for Support
Send a request to our Technical Support Staff


Request a Quote
Send a request for quote to our Sales Staff