Product Brief - Model M1434E Maxiflex 8AI ISO module


 Fits in any MAXIFLEX base I/O slot
 8 Individually isolated configurable analogue inputs
 Full inter-channel isolation for industrial applications
 24 Bit measurement resolution for high accuracy
 Each input individually configurable for mV, V & I
 Four alarm/trip setpoints per input
 Removable Terminal Blocks
 Hot Plug-in
 Automatic I/O module identification and scanning

The M1434 8AI ISO 8 channel analogue input module provides 8 fully isolated inputs that can be individually configured for millivolts, Volts, Current or Thermocouple inputs. You can scale the input value in the module into Engineering Units of your choice

The M1434E 8AI ISO module offers 8 off fully isolated inputs with 24-bit measurement resolution that can be individually configured for millivolts/Volts or Current inputs. The inputs are also individually isolated. This intelligent module is software configurable, and allows each input to be configured for a different input type and range. The input value can scaled in the module into Engineering Units of the user’s choice.

Current inputs are measured using an internal 220 Ohm resistor switched in across the input terminals.

Each input has four software settable alarm/trip setpoints and a deadband value. The status of the alarm/trip signals is available as derived digital inputs from the module.

The module may be inserted into any I/O slot in a Maxiflex system. Inputs are terminated on plug-in screw terminals.

The module can be inserted or removed while the system is powered.

Auto-detection capability allows the CPU to recognise the presence of this module in the system.

All configuration and dynamic data are made available to the system CPU through the module registers. The module is configured by writing the appropriate values to these registers, and the dynamic values are read by reading from these registers.


Further Literature 
Full specifications and Order Information
Installation Guide
Details of installation requirements and further specifications.
Declaration of Conformity
Compliance Specifications
Ask for Support
Send a request to our Technical Support Staff


Request a Quote
Send a request for quote to our Sales Staff