Products > Product Brief > C2063

Product Brief - Model C2063 OMNITERM LPI

OMNITERM LPI LOOP POWERED ISOLATOR -

picarrow Isolate any instrument current loop to 1500Vac
arrow Powered by the current loop
arrow High load capability (1 kohm)
arrow Reverse polarity and overload protected
arrow Ultra-Low volt drop <3 Volts at 20 mA
arrow Load independent - no field calibration required

Omniterm LPI. Loop powered (4-20mA) Isolator which provides 1500Vrms isolation on any current loop. Ultra Low Volt drop on input <3V.

This product has been superseded by the C2063B.

The OMNITERM LPI is a loop powered isolating current repeater specifically designed to isolate instrument current loops from circulating ground currents that can cause system inaccuracies or, at worst, instrument failure. Insert in any 4-20mA current loop to isolate the instruments in the loop. The current applied to the input is repeated on the isolated output, and the load present on the output is reflected back to the input. No separate power source is required.

Forming part of OMNIFLEX' extensive OMNITERM range of industrial instrumentation, the OMNITERM LPI is designed to be DIN rail mounted, and is 22.5mm wide.

For high density applications consider the dual version, see Omnterm LPD (model C2462A).
Further Literature 
Datasheet
Full specifications and Order Information
Omniterm B Shortform Brochure
Overview of the Omniterm B series Products
SIL1 Information
SIL1 Reliability Data
Related Products
 Omniterm LPD
Dual Channel Loop Powered Isolator
 Other Loop Isolators
See other Current Loop Isolators in the Omniterm Range
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy