Products > Omniterm Trip Amplifiers
| |
Omniterm Trip Amplifiers / Limit Alarms |
|
|
The Omniterm Trip amplifiers/Limit Alarms cover the full
range of applications from simple trip amplifiers with manually
adjustable set points to software configurable units capable of
rate-of-change alarming direct from sensor inputs.
|
| Back
to the Omniterm Signal Conditioning Overview |
|
Omniterm
TTB
Model C2465B
DIN rail mount, hardware
adjustable, 0-20mA/0-10V dual alarm/trip relay Use the TTB to
monitor a 0-20mA (4-20mA) or 0-10V (1-5V) signal and output two high or
low alarms/trips via form C relay contact. Fully isolated inputs with
current loop power provides for simple installation. 24Vdc powered. |
Omniterm
TTP
Model C2468B
DIN rail mount,
universal input, software settable dual alarm/trip relay Use the
TTP to
monitor any dc instrumentation signal and output two high or low
alarm/trips via form C relay contacts. This instrument features easy
software configurability without the need for any calibration required to
set most input temperature, voltage and current ranges. |
|
All settings user configurable
allowing only one type to be kept on the shelf.
Fully isolated input allows
insertion in any loop.
Low loop losses means little
burden on existing loops.
SIL1
certified for use in safety loops
Monitor points allow easy set
point setting using a multimeter.
see more information...
|
User configurable to any input
range minimises strategic stock holding.
No field calibration required
means lowest installation and commissioning costs.
Fully isolated input for
reliable operation.
Software configuration means
range setting can be done in minutes using the free software, and
configuration can be stored for effective asset management.
see more information...
|
|
|
Omniterm
THT
Model C2469B
DIN rail mount,
frequency input software settable combined dual alarm/trip relay with
retransmit. The THT is a frequency input signal
transmitter and dual trip amplifier combining all the features of the
Omniterm TTP and Omniterm THZ modules. This unit accepts a variety of
frequency inputs such as NAMUR proximity switches, dry contacts and tacho
signals, and produces a dc current or voltage output proportional to the
input frequency, as well as two high or low alarm/trip relay output
contacts. The unit is 24Vdc powered. |
Omniterm
TTT
Model C2467B
DIN rail mount,
universal input, software settable combined dual alarm/trip relay with
retransmit Use the
TTT when you require both dual trip functionality and analogue signal for
monitoring purposes from the same input sensor. universal input allows the
TTT to accept most dc input signal types including thermocouples,
resistance bulbs, millivolts volts and milliamps., |
|
Accepts most frequency input
sources including NAMUR proximity switches, dry contacts and tacho
signals.
Analogue output proportional
to frequency.
Two Trip relay outputs.
Fully user configurable.
Free configuration software
see more information...
|
User configurable to any input
range minimises strategic stock holding.
No field calibration required
means lowest installation and commissioning costs.
Fully isolated input for
reliable operation.
Software configuration means
range setting can be done in minutes using the free software, and
configuration can be stored for effective asset management.
see more information...
|
|
|
See our range of compatible
Alarm Annunciators... |
|
