Product Brief - Model C2363A-0 Teleterm M3e

M3e ETHERNET + SERIAL MODBUS + ISaGRAF READY

 12 Configurable Inputs and Outputs
 10/100 Ethernet
 SD Card logging
 9 - 30V dc powered


ISaGRAF Prog 10/100 Ethernet RTU with 12 Universal I/O DI/DO/AI/AO, RS232/485 Modbus Master or Slave or Conet/s or Custom Protocol. Powered from 9-30Vdc. Battery backed Real Time Clock, ISaGRAF Ready; order CC030A-URTT to activate


The TELETERM M3e is a state-of-the-art RTU designed to expand the possibilities of remote monitoring and control by providing a cost effective platform with a wide range of features.

The TELETERM M3e comes with 12 universal I/O that can be configured for anlogue or digital input or output according to your needs. The on board Ethernet, RS232/485 port can be used to acquire data from other third party devices using either the Modbus protocol, or by downloading a custom software protocol plug-in. This feature allows a wide variety of third party devices to be supported. The low power consumption of the Teleterm M3 makes it suitable for use in solar-powered and battery-powered applications.

Teleterm M3e is programmed in ISaGraf (selectable option), an industry standard programming environment for all five IEC61131-3 programming languages, providing the ability to do local control, and custom logic. The Teleterm M3e also incorporates an micro SD memory card slot to support local data logging. The Teleterm M3e is also equipped with 10/100 Ethernet port.

Typical applications for the M3e and M3e include:

  • Energy Management and Remote Meter Reading.
  • Environmental Monitoring
  • Remote Site Monitoring
  • Utilities monitoring
  • Pump Stop and Start Control
  • Reservoir Pump Integrated Control
  • Message Board Ethernet Connection from Plant

Further Literature 
Datasheet
Full specifications and Order Information
Declaration of Conformity
Compliance Specifications
User Manual
User Manual in PDF
Related Products
 Omniset Configuration Software
Windows based Configuration Utility for many Omniflex products.
 USB to MiniB Programming Cable
Use this cable to program Maxiflex and Teleterm products with MiniB USB sockets
 Powerterm PTC PSU/Charger
85-264Vac combined power supply and battery charger with 12 or 24V 8W output.
Ask for Support
Send a request to our Technical Support Staff
 

Help

Request a Quote
Send a request for quote to our Sales Staff
 

Buy